Speaking of name tags, I believe most of us should have used or seen. The design for before name tags was made of fabric or plastic, and then fixed with a pin on clothes. After a long period of wearing, the clothes will leave two holes. When we change clothes, the name tags must take otherwise, the metal parts is easy to rust. Sometimes, the hand will hurt if we do not careful, because the pin’s head too sharp. These are experiences from previous name tags.
Later, someone designed a new magnetic name tags. It main consist of 2 or 3 pcs neodymium magnets and metals.The use way is place one or two neodymium magnets on the inside of your clothing and one on the name tag. This design is simply, and protect our clothes. Now we have made one, that consist of two part, one is metal with two holes that can put two D10x2mm neodymium magnets, the magnet need use glue to fix in this metal. This one is for inside in clothes. The other part is metal with 3M adhensive in one side, the name can stick to the 3M adhensive side. When take off them from clothes, two parts will attract together.
Regarding the magnet size for name tags, Diameter 10mm x thickness 2mm and Diameter 8mm x thickness 2mm is usually used. The coating usually use Nickel coating.
Now similar design for neodymium magnet is not only use for Employees’s name tags, also for wedding, feast and so on. Any questions for neodymium magnets, contact us anytime.